The Tramex CMEX2 CMEXpert II Concrete Moisture Encounter Expert is designed for the instant and precise measurement of moisture content in concrete and other floors and screeds. Incorporating plug-in ports for the optional Hygro-i relative humidity probe and heavy-duty pin-type wood probe, this moisture meter transforms into the ideal all-in-one instrument for the flooring professional.
The Tramex CMEX2 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Tramex CMEX2 CMEXpert II Concrete Moisture Encounter Expert CMEX II determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear digital dial.
When the optional Tramex Hygro-i2 relative humidity probe is plugged into the Tramex CMEX II, the instrument automatically changes to Hygrometer Mode, allowing for in situ relative humidity (RH) testing of floor slabs per ASTM F2170 and BS 8201, 8203 Hood Method, as well as ambient conditions of temperature, relative humidity, dew point and mixing ratios. This resilient probe is reusable and can be checked regularly for calibration
Wood pin-type probe mode
In Pin-probe mode by plugging in the optional handheld or hammer probe the Tramex CMEX2 becomes a resistance type pin meter for determining the moisture content of wood and wood based products. The CMEX II gives moisture content readings from 7% to 40% in wood. A species adjustment table and a temperature adjustment chart are supplied for precise readings in woods of varying densities and readings taken in various temperatures
- Measures up to 6.9% Moisture Content in Concrete.
- Large clear backlit digital display.
- Hold function freezes meter reading when inspecting areaswhere the meter face is not visible.
- 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment. (optional)
- Attaches to a relative humidity Hygro-i probe for in situ testing of concrete to ASTM F2170. (optional)
|Size||6" x 3.5" x 1.5" (150mm x 85mm x 38mm)|
|Body Power||9 volt PP3 Battery (included)|
|Display||Digital / Backlit Depth of penetration in concrete: approx. " (20mm)|
|Moisture content for Concrete||0 to 6.9 %|
|Comparative for Gypsum floor screed||0 to 10|
|Reference scale||0 to 100|
|Relative Humidity(with optional Hygro-i2 probe)||0 to 99%|
|Humidity accuracy||0% to 99%RH +/- 2% @ 25C / 77F|
|Moisture content for wood (with optional wood pin probes)||7 to 40 %|